Configuration & Update
Additional settings can be made by connecting your smartphone / PC to the Soundbox. To do this, the Soundbox must be switched on and set to configuration mode (Setup WiFi) by double-clicking the power button. The status LED now lights up blue continuously. Please switch to your smartphone and navigate to the WiFi settings. A network with the name "SBX + serial number of the device" should now appear among the available networks.
Please connect to the network and then click on the "Log in to WLAN" pop-up. You are now in configuration mode.
Configuration
Basic information such as the software version, the version of the operating system and the battery status in millivolts can be viewed in the upper part of the lConfiguration mode. The volume of the soundbox and the sleep mode can be configured in the field below. Sleep mode is active by default from 17:00 - 06:00. During this time, no triggers are detected and no sound is played. The time period can be changed using the start time (Sleep at) and the duration in hours (Sleep length).
Caution: The time must be set to UTC time! A WLAN network (e.g. hotspot of your smartphone) can be stored in the field below using a name and password. This network is used for updating the software (see point
Advanced). To access "Advanced Mode", please press Advanced below "Save wifi", you are now in "Advanced Mode" where further settings can be made.
Advanced
In addition to the basic information (software version, operating system version, battery status), the date, the sequential code and, if available, the cause of the error can also be viewed in the upper part of the "Advanced Mode". The "Set date" button is used to reset the time on the soundbox.
The "Restart" button restarts the device.
Press the "Update" button to set the soundbox to "Update mode". The status LED now lights up in a brighter blue. To carry out an update, the WLAN must be configured correctly beforehand (see
Configuration)
The sounds can be managed in the
Storage menu item under "Manage Files"
.
Various trigger settings can be set in the
Config menu item:
- Delay (ms): Time span between sensor triggering and playing the sound
- Dead time (ms): Minimum time between 2 releases
- Volume: Volume of the soundbox
- Play order: Order of sounds (random or sequential)
- Count: (Only relevant for the "Slope Cop" variant): Number of flashes of the flash light
- Length (ms): (Only relevant for the "Slope Cop" variant): Length of the flash in ms
- Sleep mode: Time period in which releases are deactivated (see also Configuration)
- Playtest sound: Test sound playback
